关键字：double involute gear ;cantilever beam;energy method ; time-varying mesh stiffness

摘要：The tooth of double involute gear (DIG) is considered as a cantilever beam on the tooth root circle, considering the real tooth profile of DIG, an improved energy method is used to solve the time-varying mesh stiffness. The influence of tooth waist order parameters and the difference of time-varying mesh stiffness between DIG and common involute gear(CIG) are studied. The results show that the time-varying mesh stiffness of the single tooth pair is less than that of CIG with the same parameters when the contact line passing through the tooth waist grading position, and the comprehensive time-varying mesh stiffness of DIG is less than that of CIG. The tooth waist order parameters will affect the time-varying mesh stiffness of DIG, and compared with the tooth waist altitude coefficient (l *), the tooth waist tangential modification coefficient ( y*) has little effect on the time-varying mesh stiffness.

卷号：1654

期号：1

是否译文：否