教授
博士生导师
硕士生导师
教师拼音名称:shixinyan
电子邮箱:
所在单位:橡塑材料与工程省部共建教育部重点实验室
职务:橡塑材料与工程省部共建教育部重点实验室常务副主任
学历:博士研究生
办公地点:青岛市舞阳路51-1号青岛科技大学橡塑楼406房间
性别:女
联系方式:0532-84022468
学位:博士
职称:教授
毕业院校:青岛科技大学
移动电话:
邮箱:
通讯/办公地址:
办公室电话:
最后更新时间:..
关键字:EVM; damping; EPDM; NBR; PVC
摘要:The mechanical and damping properties of blends of ethylene-vinyl acetate rubber(VA content >40 wt %) (EVM)/nitrile butadiene rubber (NBR) and EVM/ethylene-propylene-diene copolymer (EPDM), both with 1.4 phr BIPB (bis (tert-butyl peroxy isopropyl) benzene) as curing agent, were investigated by DMA. The effect of polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), and dicumyl peroxide (DCP) on the damping and mechanical properties of both rubber blends were studied. The results showed that in EVM/EPDM/PVC blends, EPDM was immiscible with EVM and could not expand the damping range of EVM at low temperature. PVC was miscible with EVM and dramatically improved the damping property of EVM at high temperature while keeping good mechanical performance. In EVM/NBR/PVC blends, PVC was partially miscible with EVM/NBR blends and remarkably widened the effective damping temperature range from 41.1 degrees C for EVM/NBR to 62.4 degrees C, while CPVC mixed EVM/NBR blends had an expanded effective damping temperature range of 63.5 degrees C with only one damping peak. Curing agents BIPB and DCP had a similar influence on EVM/EPDM blends. DCP, however, dramatically raised the height of tan delta peak of EVM/NBR = 80/20 and expanded its effective damping temperature range to 64.9 degrees C. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 120: 1121-1125, 2011
卷号:120
期号:2
是否译文:否