关键字：colloids; conducting polymers; dielectric properties; nanofibers; nanoparticles; rheology
摘要：Hierarchical polyaniline/polypyrrole (PANI/PPy) copolymer nanofiber was prepared via a two-step method and adopted as dispersing materials for electrorheological (ER) fluids. The first step was used to synthesize PANI nanofibers by a rapid mixing method. Subsequently, the PANI/PPy copolymer nanofibers with a rough surface were obtained using an in situ polymerization method continuously. The morphology of the resultant PANI/PPy copolymer nanofibers can be controlled by varying the amount of Py monomer in the secondary in situ polymerization method. The rough surface of PANI/PPy copolymer nanofibers were confirmed by scanning electron microscopy and transmission electron microscopy. The diameter of PANI/PPy nanofiber is within the range 100-200 nm. The obtained PANI/PPy copolymer particles all exhibit amorphous structure through X-ray diffraction measurement. We also demonstrated that the hierarchical PANI/PPy copolymer nanofibers exhibited characteristic ER behaviors, which were investigated using a Haake rotational rheometer at various electric field strengths. The ER efficiency e for PANI-1mLPPy and PANI-2mLPPy ER fluids at shear rate 0.1 s(-1) is 36.6 and 28.5 under electric field strength E=3 kV/mm, respectively. Low leaking current density is observed even at high electric field strength and wide plateau region appeared, which show a strong ER activity for the PANI/PPy composite nanofibers. The results also indicate that the PANI/PPy composite particles have distinctly enhanced ER effect compared with the pure PANI and PPy particles under electric stimuli. The significantly improved ER property of PANI/PPy-based ER fluid is ascribed to the enhanced interfacial polarization. (c) 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46289.
卷号：135
是否译文：否