Numerical analysis of scroll compressor performance with pre-discharge valve for low-temperature heat pumps
发布时间：2024-12-24点击次数：
- 关键字：ELECTRIC VEHICLES; REED VALVE
- 摘要：Scroll compressors are a crucial component of automotive air conditioning systems. When operating at offdesigned working conditions, over-compre can occur in the scroll compressor. A pre-discharge valve (PDV) is proposed to enhance the performance of the scroll compressor under off-design working conditions. The performance of the scroll compressor with a PDV for a low-temperature heat pump system is simulated. The results show that the scroll compressor with the PDV structure has lower pressure in the compre chambers and improved over-compre compared to conventional scroll compressors. The use of the PDV also leads to a reduction in the temperature of the refrigerant gas in the compre chambers and a decrease in the leakage between the compre chambers. As the evaporating temperature increases from -25 degrees C to -5 degrees C, the mass flow rate and volumetric efficiency increase, and the discharge temperature decreases. At an evaporating temperature of -5 degrees C, the discharge temperature at the center discharge port of the scroll compressor with the PDV is reduced by 2.4 degrees C compared to the conventional scroll compressor. The input power of the scroll compressor is reduced by 165.4 W-897.7 W. The volumetric efficiency and the isentropic efficiency are improved by 0.13 % and 6.63 % respectively.
- 卷号：254
- 期号：-
- 是否译文：否
+
论文成果
个人信息
- 职称：教授
- 毕业院校：西安交通大学
- 学位：工学博士
- 电子邮箱：
其他联系方式
- 邮箱：
- 通讯/办公地址：