An anthraquinone derivative for modulating the energy levels of polysulfide molecular orbitals to enhance the kinetics of redox reactions

Key Words:G-MAH; RHEOLOGICAL PROPERTIES; GLYCIDYL METHACRYLATE; COMPATIBILIZER; BLENDS; POLYPROPYLENE; ELASTOMERS

Abstract:Moisture crosslinking would be a good substitution to cure ethylene-vinyl acetate-glycidyl methacrylate rubber (EVM-GMA) due to the characteristics of low cost and environmental friendliness. Our previous study found amino silane grafted onto EVM-GMA with low degree due to the low epoxy group content in rubber matrix. Consequently, the moisture crosslinking density of rubber compound is low. So, it is necessary to find an effective method to improve the moisture crosslinking density of EVM-GMA. In this paper, EVM-GMA grafted with gamma-aminopropyltriethoxysilane and maleic anhydride (EVM-GMA-g-APTES/MAH) composites were prepared by melt blending, and then the moisture crosslinking of composites was achieved in a 90 degrees C water bath with the aid of catalyst dibutyltin dilaurate (DBTL). The grafting of MAH onto the EVM-GMA molecular chain and its reaction with amino silane were confirmed by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FT-IR). Furthermore, the moisture crosslinking density of the samples before and after grafting MAH was compared. The results indicated that the moisture crosslinking density of the grafted MAH was higher than that of the unmodified rubber, thus achieving better overall mechanical properties. Therefore, grafting MAH was a feasible way to improve the moisture crosslinking density of EVM-GMA with the existence of silane.

Volume:141

Issue:1

Translation or Not:no